jb Capacitors manufactures and markets SMD Polymer Aluminum Solid Electrolytic Capacitor with Large permissible ripple current and Low ESR. Following are JCQ – SMD Polymer Aluminum Solid Electrolytic Capacitor features, applications, specifications and dimensions. We supply high quality Radial Conductive Polymer Aluminum Solid Electrolytic Capacitors to you.
| Category Temperature Range (°C) | -55°C ~ +105°C | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Rated Voltage Range (V) | 2.5V ~ 100VDC | ||||||||||
| Capacitance Tolerance (+20°C, 120Hz) | ±20% | ||||||||||
| Leakage Current |
Measured after 2 minutes application of rated Voltage at 20°C. |
||||||||||
| Dissipation Factor (20°C, 120Hz) |
|
||||||||||
| Low Temperature Characteristics (Max. Impedance Ratio) |
|
||||||||||
| Endurance | The specifications listed below shall be satisfied when the capacitors are restored to 20°C after application of rated voltage for 5000 hours at 105°C:
|
||||||||||
| Damp Heat (Steady State) | The specifications listed below shall be satisfied when the capacitors are restored to 20°C after application of rated voltage for 1000 hours at 60°C, 90% ~ 95% RH:
|
||||||||||
| Surge Voltage | Surge Voltage = Rated voltage x 1.15(V). The capacitors shall be subjected to 1000 cycles, each consisting of charge with the surge voltages specified at 105°C for 30 seconds through a protective resistor (Rc=1kΩ) and discharge for 5 minutes 30 seconds:
|
||||||||||
| Resistance to Soldering Heat | Measurement for solder temperature profile shall be made at the capacitor top and the terminal:
|
||||||||||
| Rated Ripple Current Coefficient |
|
